Keyword
  • Page:
  • 1

TOPIC:

50012 PINION GEAR SET FOR RS-380 MOTOR 4 years 7 months ago #56239

Hi does anyone know what pitch or if the 50012 PINION GEAR SET FOR RS-380 MOTOR is a 08 module if not does anyone know where I can find something similar to 08 for a 380 motor.please.
Any pointers will be apreciated.

Please Log in to join the conversation.

50012 PINION GEAR SET FOR RS-380 MOTOR 4 years 7 months ago #56244

If I remember right, the 380 pinions have a 2mm bore and a 0.5 mod pitch. I got mine from Robinson Racing .

Please Log in to join the conversation.

Last edit: by blakbird.

50012 PINION GEAR SET FOR RS-380 MOTOR 4 years 7 months ago #56245

Ok cool. It's the right size bore for what I need but the wrong mod. I need a 08. 12t/13t/ or 14t.
Any suggestions?

Please Log in to join the conversation.

50012 PINION GEAR SET FOR RS-380 MOTOR 4 years 7 months ago #56246

Ok cool. It's the right size bore for what I need but the wrong mod. I need a 08. 12t/13t/ or 14t.

Are you absolutely sure you need 08 mod? Those teeth are way too big for a 380 motor. Looking at the picture of pinion 50012 compared with the 2mm bore diameter, those don't look like 08 mod teeth.

Please Log in to join the conversation.

50012 PINION GEAR SET FOR RS-380 MOTOR 4 years 7 months ago #56248

It might sound a bit obscure but I am trying to fit a 390 in a re re holiday buggy. And the stock 10th is to small.

Please Log in to join the conversation.

50012 PINION GEAR SET FOR RS-380 MOTOR 4 years 7 months ago #56249

It might sound a bit obscure but I am trying to fit a 390 in a re re holiday buggy. And the stock 10th is to small.


Assuming a 390 is just a longer/higher torque version of a 380, I'd guess all other dimensions are the same, so you'd need the H1 & H3 adaptor parts that come on the Holiday buggy H sprue (19005989) used to fit the stock 380 motor.

Further assuming your new pinion is the same as the stock, pressed on 10T/0.8 mod pinion & the 390 motor shaft is the same dimension as the 380, the usual fix is a short length of 1/8" brass tube used as a spacer :)

Please Log in to join the conversation.

50012 PINION GEAR SET FOR RS-380 MOTOR 4 years 7 months ago #56254

It's just longer but seems to need a couple extra teat on the pinion. I would keep the 10 on but it's revving it's nuts off with no real distance covered.

Please Log in to join the conversation.

50012 PINION GEAR SET FOR RS-380 MOTOR 4 years 7 months ago #56255

It's just longer but seems to need a couple extra teat on the pinion. I would keep the 10 on but it's revving it's nuts off with no real distance covered.


OK I see what you mean ... if you really want to stick with the 390 then I think you'd need to look at making at least one of the holes on the spur gear side of the gearbox (part A1) into a curved slot so you can determine the gear mesh yourself, a la more competition oriented cars.

Not something I'd do myself, when there is an easy upgrade route (17T pinion & silvercan, Torque Tuned or Sport Tuned motor etc).

:)

Please Log in to join the conversation.

50012 PINION GEAR SET FOR RS-380 MOTOR 4 years 7 months ago #56259

I use a silver can with a 17t at the moment and needed something a little less tail happy for my son as it becomes abit pendulus due to its short wheel base. I did have a 21t in it but it kept lifting the front to much after I tweeked the timing.

Please Log in to join the conversation.

Last edit: by Idontunderstand.
  • Page:
  • 1
Moderators: caprinutstingray-63AndyAus
Time to create page: 0.118 seconds
Cookies are required to make this site work. If you continue to use this site you permit us to use cookies.