Keyword
  • Page:
  • 1

TOPIC:

Tble-02s settings for Rs540 in Hornet 3 years 10 months ago #59517

Hi,

I bought my sons Hornet from Wonderland Models, and it's been a good 5 months with a few replacements etc.

Now the car has stopped reversing.

It's the ESC, a Tamiya tble-02s.

I plugged the steering servo into the throttle channel and ruled out everything else.

I reversed the motor wiring and ruled out physical problems, so its the ESC.

I've tried the top end adjustment, nothing.
I've tried the "release on red" - nothing.

Is there an easy solution to this problem?

Thanks,

Andy

Please Log in to join the conversation.

Tble-02s settings for Rs540 in Hornet 3 years 10 months ago #59518

Hi Andy
You can swap the esc by a chinese one. For 6€ you can find one easy to use. You can find them on evay
The following user(s) Liked this: AndySuth

Please Log in to join the conversation.

Tble-02s settings for Rs540 in Hornet 3 years 10 months ago #59519

Thanks, I have one on order for another hornet, but it's still in the covid backlog!

If I can reset this one, that's my preference as I prefer to repair than replace.

Please Log in to join the conversation.

Tble-02s settings for Rs540 in Hornet 3 years 10 months ago #59520

Sure! It's better.

Please Log in to join the conversation.

Tble-02s settings for Rs540 in Hornet 3 years 10 months ago #59574

Not sure as I don't have the manual beside me atm, but I think there is an option to disable reverse (it used to be a setting used for races), try or check this setting.
The following user(s) Liked this: AndySuth

Please Log in to join the conversation.

Tble-02s settings for Rs540 in Hornet 3 years 10 months ago #59575

Hold set whilst turning on.

Release.

Press set again when lights turn red green orang red (press when red 2nd time).

Tried it. Not worked.

Is rs540 brushed or brushless?

Please Log in to join the conversation.

Tble-02s settings for Rs540 in Hornet 3 years 10 months ago #59577

Two wires is brushed, three wires brushless.
The following user(s) Liked this: AndySuth

Please Log in to join the conversation.

Tble-02s settings for Rs540 in Hornet 3 years 10 months ago #59578

Thanks,

2 wires from motor on mine, so brushed.

3 wires from tble-02s though.

If I can't get it going tomorrow I'll just buy a cheap Chinese one from ebay.

Please Log in to join the conversation.

Tble-02s settings for Rs540 in Hornet 3 years 10 months ago #59582

Check the normal/reverse switch for that channel on the TX?

Please Log in to join the conversation.

Tble-02s settings for Rs540 in Hornet 3 years 10 months ago #59596

Hold down button while turning on. Release button when light turns red. This will enable reverse.

Please Log in to join the conversation.

  • Page:
  • 1
Moderators: caprinutstingray-63AndyAus
Time to create page: 0.133 seconds
Cookies are required to make this site work. If you continue to use this site you permit us to use cookies.