Dear Gents / Ladies
I hope you can help me. I have 2 old 1:10 model RC cars that I built a long time ago and i mean a long time. One is a Peugeot 406 ST (58212) and the other is the belt drive Mercedes CLK GTR (58214). My three your old son has took a shine to them but they are a bit worse for wear with some parts a bit tired and I would like your advice on if I can get certain parts. They both have a dial speed controller and that needs to be changed on the Peugeot and I wanted to know what i can have to replace them? If so what would you suggest? The Mercedes needs a new pulley wheel for the front end of the belt as well as a new belt. Possibly an upgraded motor as these are both nearly at the end of their lives I have attached the manuals from this website that give the parts if that will make life easier considering their ages. Peugeot (tamiyabase.com/...dels/58212) Mercedes (tamiyabase.com/...dels/58214) Any help would be greatly appreciated. Best Regards Andy |
|
Please Log in to join the conversation. |
|
All partq are available on the net and you can find very cheap and efficient esc. You need ball bearings to.
|
Please Log in to join the conversation. |
|
With picts it should be easier to help you.
And welcome. |
Please Log in to join the conversation. |