TOPIC:

Hi guys, somebody could say me differences between the original xr311 and the rere except msc and the second servo? Thanks a lot.

The metal bits that bolt onto the side of the chassis, the ones for the receiver and ESC. The metal bracket that holds the rear of the body on I believe is different.
Obviously the lower wish bones front and back because of the newly designed torsion bars.
Apparently the gears, maybe just the main one is altered, so the shaft going through, the brass nut must be a different size.
Gear box cover is different.
 

stingray-63 wrote:

Hi guys, somebody could say me differences between the original xr311 and the rere except msc and the second servo? Thanks a lot.
 

• MSC and servo replaced with ESC.
• Slotted screws replaced with JIS.
• Plastic torsion bars replaced with metal.
• Flat side trays used for attaching radio gear replaced with formed parts that are a bit sturdier.
• Hex drive cups replaced with traditional dogbones.
• Removal of MSC allows room for 6-cell stick pack instead of 5-cell square pack.

Those are all the changes I could find when I built mine.  Body seems identical to original.  My build is at this link .

Thanks a lot Al.