|
Have just sent 3 pics, not as useful as I thouhg but it's what I've got ... Materials, 0.5mm or 0.75mm clear polycarbonate for the "glass", for the mirrors I'd probably try like making my own flat "C" channel out of 0.75mm or 1.mm styrene sheet by folding (probably with heat) around a suitable forming rod, cutt off a small section at 90 degress and another one at 30 degress or whatever it is to get the kink, join & sand down, add a bit off tube or drilled sprue to the middle for the screw fxing & locating pip, a flat bit of styren for the "glass" ... Good luck with it |
Please Log in to join the conversation. |