TOPIC:

Funny nothing on Shapeway, maybe I find the time to draw one.
But the Egress N part sprue might be cheaper, 7€ is hard to beat

I nver searched. I thought to that this evening. And for several of my projects I prefer used parts. I regret to have new rere parts on my boomer. I prefered have nice used one to be coherent.
I am thinking to put the old carbon plate on the egress but I badly repaired the upper deck

Sorry, no battery holder in the parts bin...

larbut wrote:

I'm away from home this week, but remind me next week and I will have look.

No matter.
Thanks a lot for the research

YEEEEPPPPPPPYYYYYYYYYYYYYYYYY!!!!!
The egress run smoothy with the adspec and the dynatech 01R. Not very speed but the motor is old and the transmission is freshly greased with a copper grease.

Found this link on a site for several models carbon pieces
www.fibre-lyte....gress.html

Are the egress/ avante screws in titanium??? Like I missed some screws on the TFE, Maybe could I put egress ones on the TFE????
I found several very light screws in my joblot screws.

Original Egress are titanium, if you run the TFE keep the 'normal' steel screws in the bottom for the undercoil, they are stronger if you have to remove them.

They are steel screws???? I hopee to take time to have a small run with it but not hard one. I am too in love of it.
The weather begin to be bad but in the week I should to put my tgx wheeles (tires on lightweight tf rims) and run on my work parking.

PS: I think that I found the problem with the CPR. I have an exploded self induction filter . But I still need a back RX circuit picture

stingray-63 wrote:

They are steel screws????

Only the four keeping the protection in place and I think the two for the rear wing, the rest is original vintage soft titanium.