|
Thingiversed the part as work in progress today. I probably won't have the time to change the printer nozzle before the end of the week.
Marui Hunter/Galaxy Rear Led and license plate holder by silvertriple - Thingiverse In the meantime, will probably work out another part or two I buy kits to built and ru(i)n them
The following user(s) Liked this: jord001
|
Please Log in to join the conversation. |
I really must have a go with fusion 360, i have a few things i want to design including a brace for the hornet front end to stop the chassis cracking ( would probably fit the grasshopper and others) and also recreate wheels for the big bear.
Regards
Lee
The following user(s) Liked this: stingray-63
|
|
Please Log in to join the conversation.
Last edit: by jord001.
|
|
I did a lot of things into Tinkercad which quite easy to handle... Fusion360 have more possibilities but is much more complex at the same time...
I buy kits to built and ru(i)n them
The following user(s) Liked this: stingray-63, jord001
|
Please Log in to join the conversation. |
Patience is my biggest drawback, I dont have enough of it and want things to work straight away, as you know it doesnt work like that ST does it lol
Regards
Lee
The following user(s) Liked this: silvertriple
|
|
Please Log in to join the conversation. |
|
Well, patience... This is a key thing. And when doing this, you are cumulating few areas to do mistakes:
- measurement estimations (sometimes you just have no choice than estimation) - elements you forget during the measurement (yes, there will be, specially the forgotten part because it is not mounted on the chassis when you take the measurement) - mistakes in the placement of the forms, - mistakes while doing form associations or dissociations - dimension approximation due to the printing process So in short, you have to fail to succeed, and it has to be an iterative process. Sometimes you would just make it right te first time and you will be very happy, but this is a random act that would not happen most of the times... But hey, Rome was never built in one day I buy kits to built and ru(i)n them
The following user(s) Liked this: jord001
|
Please Log in to join the conversation. |
|
I think I got a little bit addicted...
This came today Inside, a complete Galaxy RS, which needs a bit of TLC And inside the box, there is also some parts and screws... And upon inspection, I have already the spares for the damaged parts. I will need to change the tittle of the thread, and as well a bigger table for the parts all together... I buy kits to built and ru(i)n them
|
Please Log in to join the conversation. |
|
I tried to change the tittle of the thread to add "and a Galaxy RS too ", and it seems it is not possible...
Anyway, the projects continue I buy kits to built and ru(i)n them
The following user(s) Liked this: jord001
|
Please Log in to join the conversation. |
|
AFAIK you can't rename threads (not even your own), you have to create a new thread with the new name, and move all the "old" posts to that
The following user(s) Liked this: silvertriple, jord001
|
Please Log in to join the conversation. |
|
Oh, and now the thread changed name... :-D
Thanks Jonny! That being said, I could have lived without, but this became a whole story in itself. I made the counts, I have now
I buy kits to built and ru(i)n them
|
Please Log in to join the conversation.
Last edit: by silvertriple.
|