Keyword

TOPIC:

Simca 1200s Bertone Coupe scratchbuild 1 week 5 days ago #68194

  • Lemsko
  • Lemsko's Avatar Topic Author
  • Offline
  • Stomping Around
  • Stomping Around
  • Posts: 176
  • Likes received: 228
Thx,
the Triumph GT6 got its Spitfire texture because before the racing title i worked for 4 years for iENT Warbirds. Originally i planed to do a Messerschmitt Kabinenroller with Bf109 texture too, but then had no time because i had to work on Steel Beasts Pro
The following user(s) Liked this: jord001

Please Log in to join the conversation.

Simca 1200s Bertone Coupe scratchbuild 1 week 5 days ago #68195

I just asking myself while looking at the hypnotic in progress print if it is possible to print in polycarbonate?
it seems that filament exists for this
www.amazon.fr/D...B08RSBB842
Nozzle temp 285°C and bed temperature 130°C might be a difficulty, but...

That got me thinking...
The following user(s) Liked this: stingray-63, jord001

Please Log in to join the conversation.

Simca 1200s Bertone Coupe scratchbuild 1 week 5 days ago #68196

ST I would see if you can get a sample of the filament and print at your max and see what happens, I have some nylon which  im going to try at my max temps for the printer and see what happens. 

Lem, I am going to a car show today and possibly tomorrow as there is always more there on Sunday, I will see if there may be a gt6 not sure about the Messerschmitt but there will be classics there from 50's upwards I will take photo's

 
Regards

Lee
The following user(s) Liked this: stingray-63, Lemsko

Please Log in to join the conversation.

Simca 1200s Bertone Coupe scratchbuild 1 week 5 days ago #68197

I'm not even sure what is the max temp of my printer... Will need to find out...
The following user(s) Liked this: stingray-63, Lemsko

Please Log in to join the conversation.

Simca 1200s Bertone Coupe scratchbuild 1 week 5 days ago #68202

  • Lemsko
  • Lemsko's Avatar Topic Author
  • Offline
  • Stomping Around
  • Stomping Around
  • Posts: 176
  • Likes received: 228
If you have a standard hotend (not all metal) then you are limeted to 250° max. I currently print my Hips with 244° at the hotend and 106° for the bed. Additionally i use hairspray and a raft for all parts. the body parts i printed with 40mm/s and the small items with 30mm/s. Cooling off, only for bridging the cooling is turned on. Thats for Hips from Filamentum.

Lee: I am looking forward to see the photos, i will go to a night race-crawler meeting at our local club later, will also do photos. I miss the smell of these classic cars at these events...

Here are some photos from 2019 shot at an outdoor museum in Hamburg, unfortunally since Covid i havnt been to any event anymore.
Kiekeberg Museum
 
The following user(s) Liked this: stingray-63, silvertriple, jord001

Please Log in to join the conversation.

Last edit: by Lemsko.

Simca 1200s Bertone Coupe scratchbuild 1 week 5 days ago #68206

  • Lemsko
  • Lemsko's Avatar Topic Author
  • Offline
  • Stomping Around
  • Stomping Around
  • Posts: 176
  • Likes received: 228
The following user(s) Liked this: stingray-63, jord001

Please Log in to join the conversation.

Simca 1200s Bertone Coupe scratchbuild 1 week 5 days ago #68207

Nice picts. From where comes the willys? I want one . 
The following user(s) Liked this: Lemsko, jord001

Please Log in to join the conversation.

Simca 1200s Bertone Coupe scratchbuild 1 week 5 days ago #68209

  • Lemsko
  • Lemsko's Avatar Topic Author
  • Offline
  • Stomping Around
  • Stomping Around
  • Posts: 176
  • Likes received: 228
i dont know, but i can understand you
The following user(s) Liked this: stingray-63, jord001

Please Log in to join the conversation.

Simca 1200s Bertone Coupe scratchbuild 1 week 5 days ago #68210

Sure I'm a fan of the willys. I worked on the one of my friend. And the main french dealer is near my home. At some km.
The following user(s) Liked this: Lemsko, jord001

Please Log in to join the conversation.

Simca 1200s Bertone Coupe scratchbuild 10 hours 55 minutes ago #68371

  • Lemsko
  • Lemsko's Avatar Topic Author
  • Offline
  • Stomping Around
  • Stomping Around
  • Posts: 176
  • Likes received: 228
clear petg arrived:

 

Also made some graphics for decals:

 
 
 
 
Attachments:
The following user(s) Liked this: stingray-63, Al, 1972 LeMansGT Jim, silvertriple, jord001

Please Log in to join the conversation.

Last edit: by Lemsko.
Moderators: Jonny RetroAndyAus
Time to create page: 0.114 seconds
Cookies are required to make this site work. If you continue to use this site you permit us to use cookies.