TamiyaBase Model DatasheetLancia Delta HF Integrale (44029) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 44029 |
 |
| Model name: | Lancia Delta HF Integrale | |
| Scale: | 1/10 | |
| Chassis: | TG10-Mk.1
|
|
| Release date: | 22 Jun 2000 | |
| Last year available: | ||
| Price at release date: | 26000 Yen | |
| Type of model: | Rally | |
| Body type: | Polycarbonate | |
Dimensions and weight |
|
| Overall length: | 407 mm |
| Overall width: | 186 mm |
| Overall height | 154 mm |
| Wheelbase: | mm |
| Tread/track front: | mm |
| Tread/track rear: | mm |
| Ground clearance: | mm |
| Weight ready to run: | kg |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | Double wishbone |
| Suspension type, rear: | Double wishbone |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
41006 SILICONE FUEL PIPE 41018 THROTTLE SERVO HORN 41021 STARTER ROPE HOLDER 41032 1/10 SCALE GLOW-ENGINE R/C TG10 65CC FUEL TANK 41033 TG10 TM-4 MUFFLER(FS-12) 41035 TG10 TM-4 MUFFLER GASKET 41036 R/C CAR GLOW ENGINE FS-12LT 41038 WET TYPE AIR CLEANER SET 41039 AIR FILTER OIL 50038 TOOL SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50197 SNAP PIN SET 50476 RALLY BLOCK TYRES 50573 2X8mm TAPPING SCREW x 10 50574 2X8mm COUNTER.TAPP.SCREW x 10 50575 TAPPING SCREWS, 2.6X10mm (5PCS) 50576 3mm GRUB SCREW x 10 50577 3X10mm TAPPING SCREW x 10 50579 3X10mm STEP SCREW x 5 50580 3X10mm HEX BOLT x 10 50581 3X12mm COUNTER.TAPP.SCREW x 10 50582 3X14mm STEP TAPPING SCREW x 5 50583 3X15mm TAPPING SCREW x 10 50584 3X30mm CAP SCREW x 2 50585 4X10mm STEP SCREW x 5 50586 3mm WASHER x 15 50587 3mm SPRING WASHER x 15 50588 2mm E-RING x 15 50589 5mm E-RING x 5 50590 4mm BALL CONNECTOR x 5 50592 5mm BALL CONNECTOR x 10 50594 2X10mm SHAFT x 10 50595 NYLON BAND W/METAL HOOK x 10 50596 5mm ADJUSTER x 6 50597 DAMPER O-RING (RED) x 10 50599 W PARTS FOR 50519 50600 OIL SEAL FOR 50519 x 6 50602 DIFFERENTIAL BEVEL GEAR 50605 SCHRAUBENZAPFEN-BEU 50612 TGX G PARTS (50T S.GEAR&D.CASE) 50614 TGX, PARTS R-(REAR UPRIGHT/FRONT KNUCKL 50617 TGX ENGINE MOUNT x 2 50619 TGX CLUTCH SHOE 50620 16T CLUTCH BELL 50622 TGX THROTTLE LINKAGE 50626 TGX PILOT SHAFT 50627 DRIVE SHAFT 50628 TGX BRAKE PAD x 2 50629 TGX PROPELLER JOINT (F OR R) 50630 TGX BEVEL PINION&RING GEAR 50633 4mm ADJUSTER x 6 50797 5mm SHORT ADJUSTER (8 PCS.) 50800 TG10 GEAR CASE 50801 TG10 FRONT WHEEL HUB 50802 TG10 FRONT UPRIGHT 50803 TG10 BUMPER 50804 1/10 SCALE GLOW-ENGINE R/C TG10 U-SHAPED SHAFT 50805 1/10 SCALE GLOW-ENGINE R/C TG10-MK.1 CHASSIS 50806 TG10 DRIVE SHAFT 50807 TG10 PROPELLER JOINT(F) 50814 TG10 FRONT SUS ARM 50815 TG10 REAR SUS ARM 50816 1/10 SCALE GLOW-ENGINE R/C TG10 STEERING ARM 50817 1/10 SCALE GLOW-ENGINE R/C FRONT HUB CARRIER 50818 1/10 SCALE GLOW-ENGINE R/C TG10-MK.1 UPPER DECK 50819 TG10-MK.1 BATTERY CASE COVER 50822 3~10mm HEX HEAD TAPPING SCREW (10PCS) 50823 TG10 WHEEL AXLE (MB12 X2) 50838 TGX & TG10 GEAR COVER SET 50840 TG10 MINI BUMPER 50852 TG10 BODY MOUNT (B3-B12, B16) 51401 50474/51199(1825103) BODY 53066 3X1280 SEALED BALL BEARINGS 53113 RACING INNER SPONGE 53152 SHORT TYPE HARD PROPELLER SHAFT 53171 UP-GRADED BRAKE DISC 53208 LIGHTWEIGHT FLYWHEEL 53345 TL01/M03 TOE-IN REAR UPRIGHT 53384 TG10 UNDERCOWL SET 87025 CERAMIC GREASE |
10005461 H PARTS 10005462 J PARTS 10115065 P PARTS 10445250 WHEELS (2PCS.) 11054186 INSTRUCTIONS 12220001 LOCK NUT, 3mm 13455323 DAMPER SHAFT 15494001 PLUG WRENCH 15494002 BOX WRENCH 16095003 ANTENNA PIPE 16275049 URETHANE BUMPER 19494036 STICKER (A, B) & MASKING SEAL 19805240 O-RING 7/3mm 19805368 GEAR BOX JOINT BAG 19805556 2X8mm SCREW 19805557 4mm FLANGE LOCK NUT 19805572 3X12mm, 3X15mm SCREW 19805573 3X18mm STEP SCREW 19805574 3X18mm SCREW 19805575 3X18mm TAPPING SCREW 19805576 4mm FLANGE LOCK NUT 19805578 11X114mm DOUBLE SIDED TAPE 19805620 3X25mm SCREW 19805622 1150 METAL BEARING 19805629 3X12mm TAPPING SCREW 19805631 3mm ROSETTE WASHER |
All data from www.TamiyaBase.com