TamiyaBase Model DatasheetToyota Land Cruiser 40 Pick-up (47305) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 47305 |
 |
| Model name: | Toyota Land Cruiser 40 Pick-up | |
| Scale: | 1/10 | |
| Chassis: | GF-01
|
|
| Release date: | 19 Sep 2015 | |
| Last year available: | ||
| Price at release date: | 21800 Yen | |
| Type of model: | Monster Truck | |
| Body type: | Polycarbonate | |
Dimensions and weight |
|
| Overall length: | 333 mm |
| Overall width: | 244 mm |
| Overall height | 242 mm |
| Wheelbase: | 174 mm |
| Tread/track front: | 194 mm |
| Tread/track rear: | 194 mm |
| Ground clearance: | mm |
| Weight ready to run: | kg |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | 18,03 :1 |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | Double wishbone |
| Suspension type, rear: | Double wishbone |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
50038 TOOL SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50197 SNAP PIN SET 50355 18T, 19T AV PINION GEAR SET 50575 TAPPING SCREWS, 2.6X10mm (5PCS) 50576 3mm GRUB SCREW x 10 50577 3X10mm TAPPING SCREW x 10 50582 3X14mm STEP TAPPING SCREW x 5 50586 3mm WASHER x 15 50592 5mm BALL CONNECTOR x 10 50594 2X10mm SHAFT x 10 50595 NYLON BAND W/METAL HOOK x 10 50596 5mm ADJUSTER x 6 50602 DIFFERENTIAL BEVEL GEAR 50736 TL01 B PARTS (UPRIGHT) 50737 TL01 C PARTS (SUSPENSION ARM) 50808 TG10 LONG WHEEL AXLE REAR 50883 39mm DRIVE SHAFT SET 50956 7mm SNAP PIN x 10 53689 540-J MOTOR 53854 TIRE (2PCS.) 84175 4X11,5mm STEP SCREW 84195 3mm O-RING (BLACK) 87099 CERAMIC GREASE |
10005748 F PARTS 10008265 D PARTS 10554010 WHEELS (10 STERN) CHROM 10555015 1150 PLASTIC BEARING 10555092 GEAR BAG 11053802 CHASSIS INSTRUCTIONS 11053804 BODY SET INSTRUCTION 11825827 BODY SET TRANSPARENT 12300010 9mm WASHER 12300030 3mm INTERNALLY TOOTHED WASHER 13485068 3X55mm U-SHAPED SHAFT 13555048 5 X 21mm SHAFT 13580068 5X34mm PIPE 14305125 MOTOR PLATE 16095003 ANTENNA PIPE 16294011 SPONGE TAPE (20X100mm) 18000072 8X60mm RUBBER TUBING 19000307 A PARTS 19406149 TIRES & WHEELS (FERTIG VERLEIMT) 19495814 STICKER & MASKING STICKER 19804159 3X10mm SCREW 19804285 3X25mm SCREW 19804364 3mm LOCK NUT 19804394 2,6X10mm BINDING SCREW 19805185 850 METAL BEARING BAG 19805368 GEAR BOX JOINT BAG 19805469 5x19mm, 5x30mm SHAFT 19805557 4mm FLANGE LOCK NUT 19805576 4mm FLANGE LOCK NUT 19805584 3X32mm DAMPER SCREW 19805621 5X50mm SHAFT 19805622 1150 METAL BEARING 19805729 3X21mm TAPPING SCREW 19805756 3X32mm SCREW PIN 19805859 3X15mm SCREW 19805895 3X20mm SCREW 19805898 3X12M SCREW 19805976 3X46mm SCREW PIN 19808001 BUMPER COIL SPRING 19808211 3X37,7mm THREADED SHAFT 19808244 3mm NUT |
All data from www.TamiyaBase.com