TamiyaBase Model DatasheetTB-02D drift spec chassis kit (49458) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 49458 |
 |
| Model name: | TB-02D drift spec chassis kit | |
| Scale: | 1/10 | |
| Chassis: | TB-02D
|
|
| Release date: | 29 Sep 2007 | |
| Last year available: | ||
| Price at release date: | 25800 Yen | |
| Type of model: | Drift | |
| Body type: | None | |
Dimensions and weight |
|
| Overall length: | 375 mm |
| Overall width: | 188 mm |
| Overall height | mm |
| Wheelbase: | 257 mm |
| Tread/track front: | 163 mm |
| Tread/track rear: | 460 mm |
| Ground clearance: | mm |
| Weight ready to run: | kg |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | Double wishbone |
| Suspension type, rear: | Double wishbone |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
49299 BALL DIFF SPRING 49300 620 BALL THRUST BEARING. 49350 2X25mm CAP SCREW - W/2mm LOCK NUT 50038 TOOL SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50197 SNAP PIN SET 50355 18T, 19T AV PINION GEAR SET 50473 HI-TORQUE SERVO SAVER 50575 TAPPING SCREWS, 2.6X10mm (5PCS) 50576 3mm GRUB SCREW x 10 50577 3X10mm TAPPING SCREW x 10 50578 3X10mm COUNTER.TAPP.SCREW x 10 50581 3X12mm COUNTER.TAPP.SCREW x 10 50586 3mm WASHER x 15 50588 2mm E-RING x 15 50594 2X10mm SHAFT x 10 50594 2X10mm SHAFT x 10 50595 NYLON BAND W/METAL HOOK x 10 50823 TG10 WHEEL AXLE (MB12 X2) 50867 TA04 C PARTS(F UPRIGHT) 50868 TA04 D PARTS(SUS. ARM) 50869 TA04 E PARTS(R UPRIGHT) 50875 5mm BALL CONNECTOR x 4 50882 TA04 KING PIN SET 50909 TGR K PARTS (BODY MOUNT) 50985 414M F PARTS (HUB CARRIER) 50986 414M BALL CONNECTOR KING PIN 50987 TB EVO3 DIFF. BEVEL GEAR 50988 TB EVO3 A PARTS (GEAR CASE) 50990 TB EVO3 SUS. SHAFT SET 50993 TB EVO3 PROPELLER SHAFT 51042 TB02 DIFF. JOINT 51043 TB 02 B PARTS (DAMPER STAY) 51044 TB02M N PARTS (GEAR CASE) 51045 TB02M M PARTS (MOTOR MOUNT) 51048 TB02 DRIVE SHAFT (42mm) 51073 TB02 URETHANE BUMPER S 53008 4 X 1150 SEALED BEARINGS 53030 4 X 850 SEALED BEARINGS 53042 BALL DIFF GREASE 53066 3X1280 SEALED BALL BEARINGS 53126 1510 SEALED BALL BEARING SET 53270 1060 BALL BEARING 53334 LOW FRICTION DAMPER V PARTS 53440 ON-ROAD TUNED HARD SPRING SET 53443 SILICONE DAMPER OIL SOFT SET 53539 5.5mm ALUMINUM SPACER SET 53563 F201 DIFF PLATE FOR LW D.JOINT 53572 TRF DAMPER PISTON 2-HOLE x 4 53573 TRF DAMPER PISTON 3-HOLE x 4 53574 TRF DAMPER ROD GUIDE&O-RING x 4 53576 TRF DAMPER OIL SEAL x 4 53577 TRF DAMPER URETHANE BUSH x 10 53588 10mm SHIM SET x 10 X 3 TYPES 53647 WHEEL SPACER (RED) 53680 TB02 ALUMINUM MOTOR MOUNT 53689 540-J MOTOR 53850 TRF DAMPER TITANIUM COATED PISTON ROD 53859 5-SPOKE MET.PLATED WHEELS(24mm OFFSET 0) 54020 MEDIUM-NARROW DRIFT TIRES 87025 CERAMIC GREASE |
10445987 BUMPER 11054484 INSTRUCTIONS 14305026 SPANNER 14305125 MOTOR PLATE 16095010 ANTENNA PIPE (30mm)(BLACK) 19335398 CHASSIS 19335403 GEAR BAG 19400169 HEAT SINK 19444361 12mm O - RING 19804139 STEERING POST 19804159 3X10mm SCREW 19804205 5mm BALL CONNECTOR 19804206 5mm BALL CONNECTOR NUT 19804236 3X28mm TURNBUCKLE SHAFT 19804367 DAMPER CYLINDER 19805185 850 METAL BEARING BAG 19805240 O-RING 7/3mm 19805557 4mm FLANGE LOCK NUT 19805575 3X18mm TAPPING SCREW 19805628 3X42mm THREADED SHAFT 19805629 3X12mm TAPPING SCREW 19805682 3X30mm SHAFT 19805683 3X25,3mm SHAFT 19805684 3X12mm SCREW 19805696 3X8mm COUNTERSUNK HEAD SCREW 19805702 6mm SNAP PIN 19805724 3X15mm SCREW 19805741 3X51,3mm SHAFT 19805754 3X8mm TAPPING SCREW 19805761 3X18mm TURN BUCLE SHAFT 19805780 3X23mm TURN BUCLE SHAFT 19805823 2X8mm SHAFT 19805853 3X8mm SCREW 19805886 MOUNT SCREW 19805922 URETHANE BUSHING (WITHE) 19808077 2mm SHAFT GUIDE |
All data from www.TamiyaBase.com