TamiyaBase Model DatasheetTT-02B MS (84418) |
All data from www.TamiyaBase.com
Model data |
||
| Model number: | 84418 |
 |
| Model name: | TT-02B MS | |
| Scale: | 1/10 | |
| Chassis: | TT-02B MS
|
|
| Release date: | 18 Jul 2015 | |
| Last year available: | ||
| Price at release date: | 19600 Yen | |
| Type of model: | Buggy | |
| Body type: | Polycarbonate | |
Dimensions and weight |
|
| Overall length: | 380 mm |
| Overall width: | 250 mm |
| Overall height | 145 mm |
| Wheelbase: | 266 mm |
| Tread/track front: | 217 mm |
| Tread/track rear: | 208 mm |
| Ground clearance: | mm |
| Weight ready to run: | kg |
Paint codes
|
|
| Main body color(s) | |
Technical |
|
| Gear ratio (lowest): | 10,71 :1 |
| Standard pinion: | (module/teeth) |
| Motor in kit: | |
| Speed controller in kit | |
| Suspension type, front: | Double wishbone |
| Suspension type, rear: | Double wishbone |
| Damper type, front: | |
| Damper type, rear: | |
| Tyre, front: | |
| Tyre, rear: | |
| Wheel, front: | |
| Wheel, rear: | |
Parts |
| All parts according to Tamiya Guide books, Tamiya manuals and Tamiya parts listings. |
| 5 digit Spare Parts | 7 digit Spare Parts | |
50038 TOOL SET 50171 HEAT RESISTANT DOUBLE SIDED SERVO TAPE SET 50197 SNAP PIN SET 50573 2X8mm TAPPING SCREW x 10 50575 TAPPING SCREWS, 2.6X10mm (5PCS) 50576 3mm GRUB SCREW x 10 50578 3X10mm COUNTER.TAPP.SCREW x 10 50581 3X12mm COUNTER.TAPP.SCREW x 10 50582 3X14mm STEP TAPPING SCREW x 5 50586 3mm WASHER x 15 50588 2mm E-RING x 15 50594 2X10mm SHAFT x 10 50595 NYLON BAND W/METAL HOOK x 10 50600 OIL SEAL FOR 50519 x 6 50601 PISTON ROD FOR 50332/519 x 2 50823 TG10 WHEEL AXLE (MB12 X2) 51005 TT-01 P PARTS (SERVO HORN) 51076 DF02 B PARTS (UPRIGHT) 51283 5mm REINFORCED ADJUSTER 51530 D PARTS 51531 G PARTS (GEAR BAG) 51532 LOWER DECK 51537 6mm SNAP PIN 53008 4 X 1150 SEALED BEARINGS 53439 ANTI-WEAR GREASE (3G) 53443 SILICONE DAMPER OIL SOFT SET 53539 5.5mm ALUMINUM SPACER SET 53793 REAR UPTIGHT A,B 53880 LARGE DISH WHEEL (FRONT) 53880 LARGE DISH WHEEL (FRONT) 53881 LARGE DISH WHEEL (REAR) 53881 LARGE DISH WHEEL (REAR) 54187 DUAL BLOCK TIRE C FRONT 62/25 54188 DUAL BLOCK TIRE C REAR 62/35 54248 3X23mm TURNBUCKLE SHAFT 54249 3X32mm ALUMINUM TURN BUCKLE SHAFT 54501 PROPELLER SHAFT 54502 PROPELLER JOINT 54555 BATTERY PLATE SET (BATTERY PLATE) 54556 FRONT DAMPER STAY SET 54557 REAR DAMPER STAY SET 84175 4X11,5mm STEP SCREW 84195 3mm O-RING (BLACK) 87099 CERAMIC GREASE |
11054710 CHASSIS SET INSTRUCTION 11054726 BODY SET INSTRUCTIONS 12595199 U-SHAPED SHAFT 13505094 17T PINION GEAR 14305026 SPANNER 14305125 MOTOR PLATE 16095010 ANTENNA PIPE (30mm)(BLACK) 16251011 SWITCH COVER 19000562 A PARTS 19000563 C PARTS 19224036 V PARTS (WHITE) 19224037 W PARTS (WHITE) 19224038 X PARTS (WHITE) 19224039 Y PARTS (WHITE) 19415929 1280 BALL BEARING 19495417 STICKER (A & B ) 19804159 3X10mm SCREW 19804205 5mm BALL CONNECTOR 19804206 5mm BALL CONNECTOR NUT 19804237 GEAR BOX JOINT 19804278 6mm O - RING 19804364 3mm LOCK NUT 19804392 3X10mm TAPPING SCREW 19804394 2,6X10mm BINDING SCREW 19804709 2X21mm TAPPING SCREW 19804824 BODY & WING LEXAN 19805211 SPONGE TAPE 19805486 OIL SEAL 19805551 DRIVE SHAFT (2) 19805557 4mm FLANGE LOCK NUT 19805573 3X18mm STEP SCREW 19805629 3X12mm TAPPING SCREW 19805662 3X10mm FLANGE TAPPING SCREW 19805745 3X25mm COUNTERSUNK HEAD SCREW 19805754 3X8mm TAPPING SCREW 19805756 3X32mm SCREW PIN 19805758 2mm WASHER 19805800 3X32mm TURNBUCLE SHAFT 19805853 3X8mm SCREW 19805859 3X15mm SCREW 19805868 2X10mm SCREW 19805887 3X8mm COUNTERSUNK TAPPING SCREW 19805895 3X20mm SCREW 19805898 3X12M SCREW 19805917 PISTON ROD 19805922 URETHANE BUSHING (WITHE) 19805947 DAMPER SPRING (FRONT) 19805948 REAR DAMPER SPRING 19805991 3mm LOCK NUT |
All data from www.TamiyaBase.com