|
Yeahh nice ! And the rims are crazy.
|
Please Log in to join the conversation. |
A small delay, the sdcard for the 3d printer went bonkers, had to buy a new one. I used that opportunity to buy a set of feeler gauges. Best decision i made. When leveling with a sheet of paper i needed multiple adjustments after printing bed level test files. This time i levelled to 0.1 with the feeler gauge. After that one was done the bed was level, i only had to offset z axis in the slicer.
Since i lost a day i decided to start with the bumpers (only 6hours printing). The smallest body part will take 16hours, the biggest 1day and 16hours. Attachments:
The following user(s) Liked this: stingray-63
|
|
Please Log in to join the conversation. |
|
A fast printing parts set😂
The following user(s) Liked this: Lemsko
|
Please Log in to join the conversation. |
well its the material i use, it prints like abs and thats slow and with no cooling.
its a nice meditation machine though
The following user(s) Liked this: stingray-63, silvertriple
|
|
Please Log in to join the conversation. |
|
If the quality is the same as the simca it will be awesome another time.
The following user(s) Liked this: Lemsko
|
Please Log in to join the conversation. |
|
Nice to see I'm not alone. I can spend a lot of time looking at the hypnotic 3D printer working... I buy kits to built and ru(i)n them
The following user(s) Liked this: Lemsko
|
Please Log in to join the conversation.
Last edit: by silvertriple.
|