|
Attachments: |
Please Log in to join the conversation. |
Well, not exactly the mail man brought it, instead i collected it myself. Found it on our local Craiglist /Kleinanzeigen. He wanted 15euro, i could bring him down to 10euro since the model was already started and is quite old. The manual is in a nice vintage yellow instead of white paper.
Will see tomorrow if the axles of the 1/14 D90 i still have, where the electroni9c is broken, will fit into the model. Will try to make it rc over winter. Attachments:
The following user(s) Liked this: stingray-63
|
|
Please Log in to join the conversation.
Last edit: by Lemsko.
|
|
Nice big revell lem.
The following user(s) Liked this: Lemsko
|
Please Log in to join the conversation. |
The following user(s) Liked this: stingray-63
|
|
Please Log in to join the conversation. |
|
Attachments: |
Please Log in to join the conversation. |
|
Awesome ! I have the safari one and it was a badass built. I follow each one with a descent price on the bay.
The following user(s) Liked this: 1972 LeMansGT Jim
|
Please Log in to join the conversation. |
The following user(s) Liked this: 1972 LeMansGT Jim
|
|
Please Log in to join the conversation. |
|
Thanks guys, my only dilemma is stock passenger car or racer...............
|
Please Log in to join the conversation. |
|
Stock. And buy another for a racer or the rallye one😁
The following user(s) Liked this: 1972 LeMansGT Jim, Lemsko
|
Please Log in to join the conversation. |
I've now taken a closer look at the kit and I'm really shocked. I built a few Revell models as a teenager, but this is a completely different story. Firstly, I assumed that the body and floor assembly were separate, but as you can see in the pictures that's not really the case. The fact that the wing door on the left is quite warped is probably due to the age of the kit, but the imprecise fit of the body with the lower half is a disgrace. Things get even worse when the interior, which is of course previously placed on the floor pan, is inside. Unfortunately, the kit is not complete either.... In this respect, I would probably leave the model as a standing model and use it as a template for a 3D model in order to then make a mold for vacuum forming based on the TT-01/02.
Attachments: |
|
Please Log in to join the conversation. |