As posted in the mailman thread I got my first Falcon in the mail today.
This is truly my first basket case project to date, but I will try to save as much as possible, how much I got left of orginal is left to see. Here we go. Patient on the table.. Naked. So far the body seems to be the best part, even with cracks, overcut and bent pieces in the rear. This speaks for itself, nasty! Seems to be old hotglue Same with the lower suspension arm. Allways wondered when I've seen past threads how they get the shocks so dirty, well here is my first ones that's real grubby Front body mount is missing Wires are easy fix Wrong screw for the rear suspension Same for the other side Missing resistor, easy fix I gonna bin that motor for sure Broken tub with bad repair Front suspension arm.. Broken tub Holy rusted bolts! Suspension arm seems to be broken too More rash in real life than the picture shows.. So there you have it. I need to dissamble to see how bad it really is. But I need some parts, that's for sure!! Richard
The following user(s) Liked this: Al
|
|
Please Log in to join the conversation.
Last edit: by caprinut.
|
|
Poor thing!!!
Tell me who sold you The Falcon... " I will look for him... I will find him... and I will kill him!!!!!!!
The following user(s) Liked this: Gripper107
|
Please Log in to join the conversation. |
ohhh, that's not good...
I've already had a look, but I don't seem to have Falcon parts at all. I'll look again though. -Lars Signature now gets correct formatting if you edit it in your Profile. Use normal BBcode if you want.
www.tamiyabase.com was formatted automatically. |
|
Please Log in to join the conversation. |
|
Richard it s for you
rover.ebay.com/...3582098148
The following user(s) Liked this: caprinut
|
Please Log in to join the conversation. |
If it only had 4 wheels... But thanks for the link |
|
Please Log in to join the conversation. |
Could not wait to see how bad this was, so late this evening I dismantled it.
Lot's of rusted bolts, but most came out. Wrong bolts/screws was guided to the trash bin. I think I actually are able to save both the chassis and front bumper But the following parts did not make it: # D1 upper front bulkhead # Both front lower wishbones ( F3+F4 ) # Both rear suspension arms ( R1+R4 ) # Both inner suspension mounts ( D2+D3 ) # Motor # BS1 x 2 (3x46mm screw pin) # Various fastners. The rest I think I can reuse, afer a good clean. The bumper and lower bulkhead has lot of glue on them, but hope the grafitti remover will make the glue unstuck. Don't have the funds to a ultra cleaner yet, so this will be done by the old fashioned way by elbow grease Pics is comming tomorrow
The following user(s) Liked this: stingray-63, Al
|
|
Please Log in to join the conversation. |